Up To 10% Off SELECT ITEMS
;
;
;
;
;
;
;
;
;
Custom Statues – St. Dymphna Fiberglass Example
Custom Statues
We have provided many custom statues for our church customers.
See the beautiful photos showing the life-like custom 6-foot statue we provided to the National Shrine of St. Dymphna!
Last picture shows the second statue we did for another church – painted slightly different.
You can determine what colors the statue is painted.
This statue was made from a bonded resin and marble dust composite polymer.
This resin has marble dust blended in to increase the strength and durability.
If used outdoors:
The automotive-grade exterior paints are the same type of paints that cars are painted with.
On top of the paint, we put a clear coat of polyurethane – wears just like your car.
If outdoors, the colors will fade very gradually over the decades.
Statue must be cleaned regularly with mild soap and water, and we recommend applying
a clear automotive spray wax (that doesn’t need to be buffed) at least twice per year.
Allow approximately 4+ months for delivery.
If installing outdoors:
Instead of rebars, we have been using large anodized aluminum bolts, which don’t rust. They are attached to an aluminum sub-structure in the base and protrude out the bottom as deep as you like. Typically we make them about 6-8” long and would have 4 or 6 installed for this size statue.
Inquire by email for custom statues made out of resin, stone, marble, wood, bronze etc.
